The Aviation Security Training is a specialized Flight Operations Training (Flight and Cabin Crews, Ground Operations personnel, all entities applying aviation security standards). The training focuses on security in aviation including airports, passenger, cargo as well as in flight security and is based on existing ICAO as well as European regulations. At the end of the course the users will understand the common rules to protect civil aviation against acts of unlawful interference that jeopardise the security of civil aviation.

Following content is presented in simplified English and can be anytime implemented into the initial as well as recurrent training. It consists of 2 parts and is fully multimedia based. The course follows the appropriate European Regulation and includes following topics:

Content:

• General Overview on ICAO Annex 17 • Terms and Definitions
• Introduction to Aviation Security
• Airport Security including:
• Airport Planning Requirements
• Access Control
• Screening of persons other than passengers and items carried
• Surveillance, patrols and other physical controls
• Aircraft Security Procedures including:
• Searching and Checking Aircraft
• Protection of passengers and cabin baggage
• Screening of passengers and cabin baggage
• Prohibited articles / exemption of liquids

---

The following CRM modules can be used for the 3 years recurrent training cycle and fulfil the requirements of ORO.FC.230 (e).

Content:

• Human Factors Basic Concepts
• 
  Human error and reliability, error chain, error prevention and detection
• 
  Company safety culture, SOPs, organisational factors (General)
• 
  Stress, stress management, fatigue and vigilance
• 
  Information acquisition and processing, situation awareness, workload management
• 
  Decision Making incl. FORDEC
• 
  Communication and coordination inside and outside the cockpit
• 
  Leadership and team behaviour, synergy
• 
  Automation and philosophy of the use of automation
• Additional areas which warrant extra attention, as identified by the accident prevention and flight safety programme

The following topics have to be filled with company specific information or conducted as attendance training:

• Case based studies
• Specific type-related differences
• Automation and philosophy / type and operator specific
• Company safety culture, SOPs, organisational factors

Duration: 4 hrs.

---

Our Dangerous Goods Training gives the operational flexibility and offers the possibility of initial and continuous training when and where it is needed. Beside the operational benefits, our Multimedia Based Dangerous Goods Training for Flight crews, Cabin crews, Flight operations officers or Ground staff can help you to save Training costs and is based on the current IATA Dangerous Goods regulations.

The overall goals of our Dangerous Goods Training Program are:

• To increase aviation safety through improved training and evaluation
• To be responsive to changes in dangerous goods regulations and handling
• Decrease Training Costs

Content:

The Dangerous Goods Training includes:

• 
  General philosophy
• 
  Limitations
• 
  General requirements for shippers
• 
  Classification
• 
  List of dangerous goods
• 
  General packing requirements
• 
  Packing instructions
• 
  Labelling and marking
• 
  Shipper’s Declaration and other relevant documentation
• 
  Acceptance procedures
• 
  Recognition of Undeclared Dangerous Goods
• 
  Storage and loading procedures
• 
  Pilots’ notification
• 
  Provisions for passengers and crew
• 
  Emergency procedures

The following topics have to be filled with company specific information or conducted as attendance training:

• Case based studies
• Specific type-related differences
• Automation and philosophy / type and operator specific
• Company safety culture, SOPs, organisational factors

Duration: 4 hrs.

---

The first responsibility of a cabin crew member is to ensure the safety of passenger on board an aircraft. The crew has to be able to act decisively in emergency situations and apply standardized emergency procedures precisely.

This course provides an overview on emergency equipment on board an aircraft.

The training course is based on comprehensive theoretical instruction in:

• Doors and emergency exits
• Smoke detection
• Fire detection
• Fire fighting equipment incl. Hand fi re extinguishers
• Aircraft Oxygen equipment
• Emergency Lights
• Various emergency equipment incl. First Aid Kits, PBA and Life jackets

The average learning time for the training is about 1 hour.

---

In commercial air transport operations, two-engine aeroplanes shall only be operated beyond the appropriate threshold distance if the operator has been granted an ETOPS operational approval by the competent authority. Part of the approval is the requirement of training of light crew member and all other operations personnel involved in these operations.

Our training courseware deals with the following subjects:

• Overview of the history of ETOPS
• ETOPS regulations
• Definitions
• Approved One-Engine-Inoperative Cruise Speed
• ETOPS Type Design Approval
• Max. approved diversion times and time-limited systems capability
• ETOPS Operations Approval
• ETOPS requirements for aerodromes incl. enroute alt.
• ETOPS Area and Routes
• ETOPS Fuel requirements
• Critical Fuel
• Minimum Equipment List
• Communication and Navigation requirements

---

The EWIS Training is a web-based training solution, based on EASA AMC 20-22 and FAA AC120-94.

EWIS Initial and Continuation Training is now mandatory in order to comply with the training requirements in paragraphs 21.A.145 and 21.A.245 of Part-21,145.A.30 and 145.A.35 of Part-145 and M.A.706 of Part-M with respect to EWIS for EASA. For the FAA these requirements are covered in Sections 121.375 and 129.14 of 14CFR.

As the training will be presented on a generic level, an additional introduction into the real application for the aircraft types in use shall be added by the customer in a classroom session.

Course E Group 7 & 8 Flight Deck and Cabin crew

The EWIS Training includes the following modules:

• MODULE A - General Electrical Wiring Interconnection System Practices
• MODULE B - Wiring Practices Documentation
• MODULE C - Inspection
• MODULE D - Housekeeping
• MODULE E - Wire
• MODULE F - Connective Devices
• MODULE G - Connective Device Repair

---

Fatigue has been identified as a contributing factor to several accidents and incidents. It has long been recognised that fatigue, sleep loss and circadian disturbance can degrade performance and therefore have an influence on safety.

Under ORO.FTL, operators are required to monitor and manage the risk resulting from crew member fatigue within their operation. Part of the Fatigue Risk Management is to provide appropriate Fatigue Management Training to crew member according to AMC1 ORO.FTL.250

The interactive web-based training includes the following topics and can be customized to reflect the operators fatigue risk management if required:

• Applicable regulatory requirements for flight, duty and rest
• The basics of fatigue including sleep fundamentals and the effects of disturbing the circadian rhythms
• The causes of fatigue, including medical conditions that may lead to fatigue
• Fatigue countermeasures
• The effect of fatigue on performance
• The influence of lifestyle, including nutrition, exercise, and family life on fatigue
• Familiarity with sleep disorders and their possible treatments
• The effects of heavy short range schedules on individuals (if applicable)
• The effect of operating through and within multiple time zones (if applicable)
• The crew member responsibility for ensuring adequate rest and fitness for flight duty

Our web-based course was specially developed for

• Flight and cabin crew
• Management
• Maintenance personell

A final check completes the training.

Duration: 2 hours

---

Smoke and fi re on board an aircraft create some of the most critical incidents in aviation. Flight as well as Cabin Crew members have to perform initial as well as recurrent firefighting and smoke removal training. This course provides the theoretical knowledge required on this topic.

As a completely web-based courseware it is also targeted to train causes and measures for prevention of smoke and smell development in the cockpit.

Our web-based course was specially developed for people whose jobs require an awareness of fire protection and fi re-fighting measures on board an aircraft, such as:

• Flight crew
• Cabin crew

The training course is based on comprehensive theoretical instruction in:

• General aspects regarding smoke and fi re on board an aircraft
• Fire classification, development and extinguishing
• Fire extinguishing agents
• Operation of fi re extinguishers
• Wire Degradation
• Circuit Breakers
• Communication and General Procedures

A final check completes the training.

Duration: 1 hour

---

Our First Aid Training gives the necessary operational flexibility and offers the possibility of continuous training when and where it is needed. Beside the operation benefits, our Web Based First Aid Training can help you to save Training costs and conforms to the requirements of EU OPS 1.

• Flight crews
• Cabin crews
• Flight operation officers
• Ground staff

completely The overall goals of our First Aid Training Program are:

• To increase aviation safety through improved training and evaluation
• To be responsive to changes in fi rst aid regulations and handling
• Decrease Training Costs

The First Aid Training includes:

• Physiology of Flight incl. Hypoxia
• Medical Emergencies
• Allergic Reaction, Hyperventilation, Airsickness, Epilepsy, Heart Attack,
  Stroke, Diabetes, Asthma
• Basic First Aid
• Bleeding, Burns, Fractures, Head injuries, Drowning, Heat Exhaustion,
  Heatstroke, Unconsciousness, Shock, the principles of Resuscitation,
  Assessing the Casualty, the recovery Position, Restoring the circulation,
  Resuscitation for Children, Chocking

---

Icing, thunderstorms, wind shear and turbulence can present serious hazards to your fl ight operation. This training will raise awareness on possible flight hazards and helps you to understand the forces behind these phenomena.

The course focuses on the occurrence, development and effects of those flight hazards. By increasing your understanding of these subjects you will improve your ability to avoid the associated hazards.

The backbone of this course is the Learning Management System (LMS) which allows the organization, tracking and documentation of the training activities. Self assessment questions are directly linked to the multimedia-based training allowing the student to check his knowledge.

The Flight Hazards course covers the following topics:

• Icing
• Turbulence
• Wind Shear
• Thunderstorms
• Tornadoes
• Inversions
• Hazards in mountainous areas
• Visibility reducing phenomena

Duration: 1 hour

---

This course provides a comprehensive overview on the performance requirements for CS25 certified aircraft and serves as a perfect tool to refresh basic knowledge requirements.

Our multimedia based training courseware prepares participants for the operational duties relevant to every-day practice in a targeted manner.

The backbone of this course is the Learning Management System (LMS) which allows the organization, tracking and documentation of the training activities. Self assessment questions are directly linked to the multimedia-based training allowing the student to check his knowledge.

For this the students have to look into the following:

• Definition of terms used
• Take off Distances
• Accelerate stop distance
• Balanced and unbalanced field length concept
• Performance limited take-off mass
• Take off performance on wet and contaminated runways
• Use of Reduced and Derated Thrust
• Climb
• Cruise
• En-route One Engine Inoperative
• Descent
• Approach and Landing

The average learning time for the training is about 4 hours.

---

‘Threat management’ means the process of detecting and responding to the threats with countermeasures which reduce or eliminate the consequences of threats and mitigate the probability of errors or undesired aircraft states.

Threat and Error Management as well as Flight Safety is a core competence of flight instructors and shall be part of each training as well assessment. This course will raise awareness on Flight Safety in general as well as Threat and Error Management in special. By increasing your understanding of these subjects, you will improve your ability to respond accurately to possible threats, mitigate errors and therefore increase the overall safety of your operation.

The backbone of this course is the Learning Management System (LMS) which allows the organization, tracking and documentation of the training activities. Self assessment questions are directly linked to the multimedia-based training allowing the student to check his knowledge.

The Flight Safety Concepts course covers the following topics:

• Flight Safety Concepts incl. the SHELL and Swiss Cheese Model
• Threat and Error Management
• Human Error
• Error Chain

Duration: 20 minutes.

---

The Low Visibility Operations Training can be used for initial pilot training, familiarization training and recurrent/refresher training, but also for other aircraft or airport personnel involved in low visibility operations. The course covers all aspects of the European Aviation Safety Agency (EASA) recommendations for low visibility training as stated in EU OPS 1 and follows the guidelines of CS-AWO and the European Guidance Material on Aerodrome Operations under Limited Visibility Conditions.

The course addresses three primary areas:

• Increased awareness during operation under low visibility
• Prevention of incidents and accidents
• Recognition of the role of ATC and ground operations during low visibility operations

The training gives information on a wide range of subjects including general operating procedures, airborne equipment, airport equipment and lighting, ATC procedures, and the impact of reduced visibility due to fog, rain and snow. A special module which is customized to your company and aircraft-specific procedures and regulations can be added to the course.

The Low Visibility Operations Training contains the following modules:

• Module 1 – INTRODUCTION TO LOW VISIBILITY OPERATION
• Module 2 – AEROPLANE AND FLIGHT CREW
• Module 3 – ATC
• Module 4 – AERODOME
• Module 5 – VISUAL ASPECTS
• Module 6 – OPERATIONS

---

Part OPS (SPA.MNPS.100) requires that aircraft shall only be operated in designated minimum navigation performance specifications (MNPS) airspace in accordance with regional supplementary procedures, where minimum navigation performance specifications are established, if the operator has been granted an approval by the competent authority to conduct such operations. One requirement to obtain such an approval is that a training program for flight crew members involved in these operations has to be provided.

Our training courseware deals with the following subjects:

• North Atlantic Track system (NAT)
• MNPS Airspace
• Organised Track System and structure
• Aircraft system requirements
• Flight planning requirements
• Communication and Clearances
• Mach Number Technique
• System Degradation or failure
• In flight contingencies

---

Performance Based Navigation (PBN) is a new concept based on the use of Area Navigation (RNAV) systems. The aim of the PBN concept is to ensure global standardisation of RNAV and RNP specifications and to limit the proliferation of navigation specifications in use.

The Performance Based Navigation (PBN) course is based on the ICAO Performance- based Navigation (PBN) Manual and is divided into two parts.

Part 1 provides general information on Performance Based Navigation concept including terminology and explains the basic idea.
Part 2 of the training covers details of the appropriate RNAV and RNP specifications.

Content:

The Performance-Based Navigation (PBN) Concept:

• Components of PBN
• Scope
• Terminology
• RNAV versus RNP system
• Advantages
• PBN Operation
• Designation of RNP and RNAV specification
• Application of RNAV and RNP specifications
• RNAV and RNP systems

Implementing RNAV Operations:

• RNAV 1 and 2
• RNAV 5
• RNP 10
• RNP 4

---